SOCI Logo Get SOCI at Fast, secure and Free Open Source software downloads

Statements, procedures and transactions

Statement preparation and repeated execution

Consider the following examples:

// Example 1.
for (int i = 0; i != 100; ++i)
    sql << "insert into numbers(value) values(" << i << ")";

// Example 2.
for (int i = 0; i != 100; ++i)
    sql << "insert into numbers(value) values(:val)", use(i);

Both examples will populate the table numbers with the values from 0 to 99.

The problem is that in both examples, not only the statement execution is repeated 100 times, but also the statement parsing and preparation. This means unnecessary overhead, even if some of the database servers are likely to optimize the second case. In fact, more complicated queries are likely to suffer in terms of lower performance, because finding the optimal execution plan is quite expensive and here it would be needlessly repeated.

The following example uses the class statement explicitly, by preparing the statement only once and repeating its execution with changing data (note the use of prepare member of session class):

int i;
statement st = (sql.prepare <<
                "insert into numbers(value) values(:val)",
for (i = 0; i != 100; ++i)

The true parameter given to the execute method indicates that the actual data exchange is wanted, so that the meaning of the whole example is "prepare the statement and exchange the data for each value of variable i".

Portability note:

The above syntax is supported for all backends, even if some database server does not actually provide this functionality - in which case the library will internally execute the query in a single phase, without really separating the statement preparation from execution.

For PostgreSQL servers older than 8.0 it is necessary to define the SOCI_PGSQL_NOPREPARE macro while compiling the library to fall back to this one-phase behaviour.

Rowset and iterator-based access

The rowset class provides an alternative means of executing queries and accessing results using STL-like iterator interface.

The rowset_iterator type is compatible with requirements defined for input iterator category and is available via iterator and const_iterator definitions in the rowset class.

The rowset itself can be used only with select queries.

The following example creates an instance of the rowset class and binds query results into elements of int type - in this query only one result column is expected. After executing the query the code iterates through the query result using rowset_iterator:

rowset<int> rs = (sql.prepare << "select values from numbers");

for (rowset<int>::const_iterator it = rs.begin(); it != rs.end(); ++it)
     cout << *it << '\n';

Another example shows how to retrieve more complex results, where rowset elements are of type row and therefore use dynamic bindings:

// person table has 4 columns

rowset<row> rs = (sql.prepare << "select id, firstname, lastname, gender from person");

// iteration through the resultset:
for (rowset<row>::const_iterator it = rs.begin(); it != rs.end(); ++it)
    row const& row = *it;

    // dynamic data extraction from each row:
    cout << "Id: " << row.get<int>(0) << '\n'
         << "Name: " << row.get<string>(1) << " " << row.get<string>(2) << '\n'
         << "Gender: " << row.get<string>(3) << endl;

rowset_iterator can be used with standard algorithms as well:

rowset<string> rs = (sql.prepare << "select firstname from person");

std::copy(rs.begin(), rs.end(), std::ostream_iterator<std::string>(std::cout, "\n"));

Above, the query result contains a single column which is bound to rowset element of type of std::string. All records are sent to standard output using the std::copy algorithm.

Bulk operations

When using some databases, further performance improvements may be possible by having the underlying database API group operations together to reduce network roundtrips. SOCI makes such bulk operations possible by supporting std::vector based types:

// Example 3.
const int BATCH_SIZE = 25;
std::vector<int> valsIn;
for (int i = 0; i != BATCH_SIZE; ++i)

statement st = (sql.prepare <<
                "insert into numbers(value) values(:val)",
for (int i = 0; i != 4; ++i)

(Of course, the size of the vector that will achieve optimum performance will vary, depending on many environmental factors, such as network speed.)

It is also possible to read all the numbers written in the above examples:

int i;
statement st = (sql.prepare <<
                "select value from numbers order by value",
while (st.fetch())
    cout << i << '\n';

In the above example, the execute method is called with the default parameter false. This means that the statement should be executed, but the actual data exchange will be performed later.

Further fetch calls perform the actual data retrieval and cursor traversal. The end-of-cursor condition is indicated by the fetch function returning false.

The above code example should be treated as an idiomatic way of reading many rows of data, one at a time.

It is further possible to select records in batches into std::vector based types, with the size of the vector specifying the number of records to retrieve in each round trip:

std::vector<int> valsOut(100);
sql << "select val from numbers", into(valsOut);

Above, the value 100 indicates that no more values should be retrieved, even if it would be otherwise possible. If there are less rows than asked for, the vector will be appropriately down-sized.

The statement::execute() and statement::fetch() functions can also be used to repeatedly select all rows returned by a query into a vector based type:

const int BATCH_SIZE = 30;
std::vector<int> valsOut(BATCH_SIZE);
statement st = (sql.prepare <<
                "select value from numbers",
while (st.fetch())
    std::vector<int>::iterator pos;
    for(; pos != valsOut.end(); ++pos)
        cout << *pos << '\n';


Assuming there are 100 rows returned by the query, the above code will retrieve and print all of them. Since the output vector was created with size 30, it will take (at least) 4 calls to fetch() to retrieve all 100 values. Each call to fetch() can potentially resize the vector to a size less than its initial size - how often this happens depends on the underlying database implementation. This explains why the resize(BATCH_SIZE) operation is needed - it is there to ensure that each time the fetch() is called, the vector is ready to accept the next bunch of values. Without this operation, the vector might be getting smaller with subsequent iterations of the loop, forcing more iterations to be performed (because all rows will be read anyway), than really needed.

Note the following details about the above examples:

Taking these points under consideration, the above code example should be treated as an idiomatic way of reading many rows by bunches of requested size.

Portability note:

Actually, all supported backends guarantee that the requested number of rows will be read with each fetch and that the vector will never be down-sized, unless for the last fetch, when the end of rowset condition is met. This means that the manual vector resizing is in practice not needed - the vector will keep its size until the end of rowset. The above idiom, however, is provided with future backends in mind, where the constant size of the vector might be too expensive to guarantee and where allowing fetch to down-size the vector even before reaching the end of rowset might buy some performance gains.

Stored procedures

The procedure class provides a convenient mechanism for calling stored procedures:

sql << "create or replace procedure echo(output out varchar2,"
       "input in varchar2) as "
       "begin output := input; end;";

std::string in("my message");
std::string out;
procedure proc = (sql.prepare << "echo(:output, :input)",
                                 use(out, "output"),
                                 use(in, "input"));
assert(out == "my message");

Portability note:

The above way of calling stored procedures is provided for portability of the code that might need it. It is of course still possible to call procedures or functions using the syntax supported by the given database server.


The SOCI library provides the following members of the session class for transaction management:

In addition to the above there is a RAII wrapper that allows to associate the transaction with the given scope of code:

class transaction
    explicit transaction(session & sql);


    void commit();
    void rollback();

    // ...

The object of class transaction will roll back automatically when the object is destroyed (usually as a result of leaving the scope) and when the transaction was not explicitly committed before that.

A typical usage pattern for this class might be:

    transaction tr(sql);

    sql << "insert into ...";
    sql << "more sql queries ...";
    // ...


With the above pattern the transaction is committed only when the code successfully reaches the end of block. If some exception is thrown before that, the scope will be left without reaching the final statement and the transaction object will automatically roll back in its destructor.

Portability note:

Different database servers have different policies with regard to the implicit transaction management. Some of them start the implicit transaction with the first DML statement and keep it open until explicitly commited or rolled back (or closing the whole session). Others will treat each statement as if it was a separate, auto-commited transaction. For better compatibility, it is recommended to use the above functions for explicit transaction management.

Basic logging support

The following members of the session class support the basic logging functionality:

The first two functions allow to set the user-provided output stream object for logging. The NULL value, which is the default, means that there is no logging. An example use might be:

session sql(oracle, "...");

ofstream file("my_log.txt");

// ...

Each statement logs its query string before the preparation step (whether explicit or implicit) and therefore logging is effective whether the query succeeds or not. Note that each prepared query is logged only once, independent on how many times it is executed.

The get_last_query function allows to retrieve the last used query.

 All Classes Namespaces Files Functions Variables Typedefs Enumerations Enumerator Defines
SourceForge Logo

Generated on Sun Oct 3 2010 17:42:17 for EXTRAS-SOCI by Doxygen 1.7.1